Filters

Deep-drawing presses

ERFURT PKnZT VI 800 TS Double-action deep-drawing press

Y/M: 1983
Max. force of internal slide:500t distance to bottom dead center 12 mm Max. force of internal sli...
Details

Double-crank sheet stamping presses

TMP K3540 1000TN Double-crank sheet stamping presses

Y/M: 1977
Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram ad...
Details

KALININ K3535A,315t Double-crank sheet stamping press

Y/M: 1980
Capacity (ton): 315 | Table size, mm: 2500 x 1250 | Slider stroke, mm: 400 | Shut height,mm: 750 | Strokes ...
Details

TMP Voronezh K3044V, 2500T Sheet stamping press

Y/M: 1981
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between tabl...
Details

TMP Voronezh K3546, 4000T Double-crank single-action closed press

Y/M: 1982
Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of ...
Details

TMP K3540 1000TN Sheet stamping press

Y/M: 1974
Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram ad...
Details

ERFURT PKZZ 250 Double-crank sheet stamping press

Y/M: 1980
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of ...
Details
View All Double-crank sheet stamping presses

Eccentric Press - Single Column

ERFURT PEE-250 Eccentric Press - Single Column

Y/M: 1985
Pressure: 250 ton Throat: 400 mm Holes in the table: 160 mm Ram stroke: 36,126 mm Number of strok...
Details

Four-crank sheet stamping presses

TMP K4040, 1000T Closed four-crank sheet stamping press

Y/M: 1985
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency ...
Details

TMP Voronezh KA4537,500T Four crank single action press

Y/M: 1980
Capacity, ton 500 Rated distance of slide above bottom, mm 12 Slide stroke, mm 630 Continuous run...
Details

TMP VORONEZH K665 (800T) 4–crank closed simple-action press

Y/M: 1967
Nominal force: 8000 kN Slide stroke: 800 mm Distance between table and slide: 1500 mm Main drive ...
Details

TMP VORONEZH K664 500 T 4-crank closed simple-action stamping press

Y/M: 1969
Nominal effort kN 5000 Slide stroke, mm 630 The distance between table and slider, mm 1400 Main d...
Details

H-Frame Hydraulic Presses

TOS Rakovnik CBJ 500-1 H-Frame Hydraulic Press

Y/M: 1960
Specifications:Pressing force (closing) 500 t Pressing the power back 210 t Pressing force ejec...
Details

High-precision stamping press

LEINHAAS ERFURT USTA 450/2000x1250 High-precision stamping press

Y/M: 2014
Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) M...
Details

Horizontal Hydraulic press

ODESSAPRESSMASH P6738, 630T Horizontal Hydraulic press for pressing of wheelsets

Y/M: 1972
Press capacity, ton-forces 630 Fluid working pressure, MPa 20 Max. stroke of main cylinder plun...
Details

Hydraulic Press Single-column

STANKO P6330 100T Hydraulic Press Single-column

Y/M: 1980
Rated force, kN 1000 Slider stroke, 500 mm Distance between table and slider, mm 750 Main engi...
Details

Powder Compacting Presses

Dorst TPA-45 Automatic Powder Compacting Presses

Y/M: 2025
Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t ...
Details

Dorst TPA-30HS Hydraulic Powder Press

Y/M: 2007
with robot + adaptor Technical Data DORST TPA 30 HS Pressing force:300 kN Upper ram travel:180...
Details

Dorst TPA-15/3 Automatic Powder Compacting Press

Y/M: 2013
Pressing power max. kN 150 Withdrawl power max. kN 80 Die support power max. kN 50 Upper ram s...
Details

ORIENTANKPRESS OPC - 60A Molding press

Y/M: 2020
Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die retu...
Details

Dorst TPA-180 Powder Compacting Press

Y/M: 1978
Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressi...
Details

EPG CHINA EPM-60A Renewed Automatic Powder Compacting Press

Y/M: 2014
Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW...
Details
View All Powder Compacting Presses

RAILWAY LATHE

ODESSAPRESSMASH P6738, 630T Horizontal Hydraulic press for pressing of wheelsets

Y/M: 1972
Press capacity, ton-forces 630 Fluid working pressure, MPa 20 Max. stroke of main cylinder plun...
Details

Screw press

STANKO F1732-160t Screw press with arc stator drive

Y/M: 1988
Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance...
Details

STANKO FB1732 - 160t Screw press with arc stator drive

Y/M: 1980
Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance...
Details

Transfer presses

AIDA FT2-40 Transmax press

Y/M: 1974
Effort between stands 400 tons Number of positions incl. cutting position - 7 Maximum force at ea...
Details